Home / News / Submersible Pump

Submersible Pump

Views: 88     Author: Site Editor     Publish Time: 2020-04-22      Origin: Site

Many customers will encounter some technical problems when choosing a deep well pump (deep water pump), such as: the height of the deep well pump (deep water pump) and what kind of state he can reach, will it rust, what should I do? Maintenance and other issues. To solve some of the above doubts, first let's clarify the principle of the deep well pump (deep water pump).

Many customers will encounter some technical problems when choosing a deep well pump (deep water pump), such as: the height of the deep well pump (deep water pump) and what kind of state he can reach, will it rust, what should I do? Maintenance and other issues. To solve some of the above doubts, first let's clarify the principle of the deep well pump (deep water pump).


The vane pump that draws water from the well is called a deep well pump. Among them, the long shaft deep well pump is a more commonly used well pump, which is mostly used in machine wells. The deep well pump is composed of three parts: the top is the motor, which is installed in the middle of the wellhead ground The lower end of the water delivery pipe and the drive shaft is the working part of the well pump, which is submerged below the water surface of the well. Due to the well depth, the head is required to be large, and the long shaft deep well pump has a lift range of 50 to 1100m. Centrifugal pump.According to the structural characteristics of the deep well pump, correct use and timely troubleshooting are very important to ensure the safe operation of the deep well pump and extend its service life.


The first step in choosing a deep well pump is to confirm the depth of the well and the width of the well. The reason why the width of the well is to be confirmed is because if the width is not confirmed, then it is very likely that the water pump cannot be put in.


Again, we need to confirm the distance from the wellhead to the destination, so that we can calculate the head of the deep well pump you actually need, and confirm the above points, then the model of the deep well pump should be able to be confirmed.


Confirm the model of the deep well pump, we must pay attention to when installing, the first step should add water to the deep well pump, because this series of deep well pump is water-cooled, there is a water hole next to the motor, filled with water, connected You can put the water pipe into the well. Of course, the cable must be connected.
It is worth mentioning here that deep well pumps cannot generally be placed at the bottom of the well, because there may be fine sand at the bottom, which affects the motor to the pump. It may burn the motor and wear the impeller.


Therefore, when we choose and use the deep well pump, if there is anything we do not understand, it is best to give us a call to confirm what to do and how to deal with it. The above is the basic way of using deep well pumps.WechatIMG418


Contact Us

For More , Please Call

86-750-3818558
86-750-3898465

Quick Links

About Us

Product Links

Get in touch

    No.090-3, Hecheng Road, Hecheng Town, Heshan City, Jiangmen, China.

     0750-8385288 
       0750-8385388


   
liyuan@liyuan-pump.com

    Fax: 0750-8383980

©  2019Guangdong Jiangmen Liyuan Pump Industry Co., Ltd.   Powered by meiyuseo.com